In-Line Pumps

In-Line Pump

Capacity to 1500 GPM (5678 l/min)
Pressures to 165 PSI (116 m)
Working Pressures to 150 PSI
 
 
 
 
 
 
 
  Space saving design
No foundation or pads required
Suction and discharge flanges are on a common centerline, 180 apart for inline mounting in piping.
Top pullout design allows for fast and easy servicing.
The rotating element is easily removed without disturbing suction and discharge piping.
Self-venting design eliminates the need for an automatic air release valve.
Bronze impeller is dynamically balanced and keyed to the motor shaft.
    Vertical Turbine Pumps

Vertical Turbine Pump

Capacity to 5000 GPM (18,925 l/min)
Pressures to 350 PSI (246 m)
Working Pressures
up to 200 PSI with 125 lb. A.S.A. flanges
up to 550 PSI with 250 lb. A.S.A. flanges
 
 
 
 
 
 
 
Required by NFPA when operating under a static suction lift condition.
Dynamically balanced impellers secured to the shaft with steel locking collets to assure proper problem free operation.
Open lineshaft design provides for product lubrication of the bearings.
Available in electric motor or diesel engine driven configuration.
Provided with an oversized air release valve as standard.
Available in special materials of construction for salt water applications.
    Split Case Pumps 8100 Series

Split Case Pumps 8100 Series

Capacity to 3000 GPM (11,355 l/min)
Pressures to 255 PSI (179 m)
Working Pressures
up to 250 PSI with 125 lb. A.S.A. flanges
up to 375 PSI with 250 lb. A.S.A. flanges
 
 
 
 
 
 
 
Space saving design.
Available in horizontal or vertical configuration.
Suction and discharge flanges are on a common centerline.
Bearing span is kept to a minimum.
Available in electric motor driven or engine driven configuration.

Available in clockwise or counter-clockwise rotation to simplify pump room layout.
    Split Case Pumps 8200 Series

Split Case Pumps 8200 Series

Capacity to 1000 GPM (3,785 l/min)
Pressures to 640 PSI (450 m)
Working Pressures
up to 500 PSI with 250 lb. A.S.A. flanges
up to 800 PSI with 800 lb. A.S.A. flanges
 
 
 
 
 
 
 
Space saving design.
Suction and discharge flanges are on a common centerline.
Bearing span is kept to a minimum.
Compact pump design.
Dual volute casing balances radial forces on the shaft and bearings.
Available in electric motor driven or engine driven configuration.
Two stage pump with two impellers threaded together.
Dynamically balanced impellers.
Available in clockwise or counter-clockwise rotation to simplify pump room layout.
    Split Case Pumps 9100 Series

Split Case Pumps 9100 Series

Capacity to 5000 GPM (18,925 l/min)
Pressures to 208 PSI (146 m)
Working Pressures
up to 175 PSI with 125 lb. A.S.A. flanges
up to 255 PSI with 250 lb. A.S.A. flanges
 
 
 
 
 
 
 
Space saving design.
Suction and discharge flanges are on a common centerline.
Dual volute casing balances radial forces on the shaft and bearings.
Available in electric motor driven or engine driven configuration.
Available in clockwise or counter-clockwise rotation to simplify pump room layout.
    Skid Packages
   With ITT A-C fire pump systems you can rest assured of start-up and future product support being available locally, worldwide.
1. UL listed/FM approved diesel engine
2. Pressure sensing lines installed per code requirements
3. Single point electrical connection (all electrical components pre-wired at the factory)
4. UL listed/FM approved fire pump controller
5. Stuffing box and engine raw water drain connections
6. Fire-piped fuel system
7. UL listed/FM approved horizontal split case fire pump